UniShim Adjustable Outlet Spacer- 50pk

Product Description

UniShim is a reusable, fully adjustable 6-32 shimming fastener that sets receptacles and switches flush with the finished wall when the box is recessed or the drywall is cut too wide. This pack contains 50 spacers for use on standard receptacles, GFCI, dimmers and Decora-style devices.

Key features

• Fixes sunken outlets in seconds. Positions the device yoke against the wall surface when drywall overlap isn't possible.
• Fully adjustable, not stacked. One UniShim adjustable spacer dials in the exact depth, replacing piles of loose plastic shims.
• Works with every wall device. Receptacles, GFCI, switches, dimmers, Decora-style devices, and dryer and range receptacles.
• Stops wobble and cracked drywall. Keeps tamper-resistant receptacles from caving in under heavy plug-in force.
• Straight cover plates. Corrects plate misalignment caused by compromised overlap.
• Reusable and readjustable. Remove and reset as many times as needed.
• Patented catch-pin locks the setting — it grabs and holds UniShim at your chosen depth as the screw goes in. QR-code 3D interactive instructions included.
• Pro pack of 50 for residential and commercial new construction, remodels and callback repairs.

Description

When drywall is cut too far from the wall box, the device ears have nothing to bear on. The outlet sinks, wobbles, and the cover plate sits crooked. Over time, plug-in force can crack the drywall and loosen the device, leading to customer callbacks.

UniShim solves this at the mounting screw. Install it on the 6-32 device screw with the patented catch-pin facing the metal device ears, and set it where the device will sit flush with the wall. As you drive the screw in, the catch-pin catches and holds UniShim in place; then just tighten the screw for a firm, flush, long-lasting installation. Unlike stackable plastic spacers, one UniShim covers the full adjustment range and stores in a fraction of the space.

UniShim is designed to help installers meet NEC 406.5(A) requirements for flush-mounted devices. Final installations must comply with all applicable national and local electrical codes.

What's in the Flip-Top Container: 50 × UniShim Model 6-32 adjustable outlet spacers.

Need light fixtures? See UniShim Model 832 for light fixture bracket mounting issues.

Specifications

Frequently Asked Questions

Q: What is the UniShim Adjustable Outlet Spacer?

A: It is a reusable 6-32 shimming fastener that sets an outlet or switch flush with the wall when the electrical box is recessed. It replaces stacks of loose plastic shims with one adjustable part.

Q: How do I fix an outlet that is sunk into the wall?

A: Put a UniShim on each 6-32 device screw with the catch-pin facing the metal device ears, set it where the outlet will be flush with the wall, then drive the screw in. The catch-pin holds UniShim in place, and you finish by tightening the screw.

Q: Does UniShim work with GFCI outlets and dimmers?

A: Yes. The 6-32 model works with standard receptacles, GFCI, switches, dimmers, Decora-style devices, and dryer and range receptacles.

Q: Is UniShim code compliant?

A: UniShim is designed to help installers meet NEC 406.5(A) requirements for flush-mounted devices. The installer remains responsible for compliance with all national and local codes.

Q: How does the UniShim catch-pin work?

A: The patented catch-pin faces the metal device ears. When you drive the device screw in, the pin catches and holds UniShim at the depth you set, so it can't shift while you tighten the screw.

Q: How is UniShim different from plastic outlet spacers?

A: Plastic spacers are stacked in fixed thicknesses, while UniShim is one fully adjustable fastener. It also stores in less space and can be reused.

Q: Can UniShim be reused?

A: Yes. It can be removed, readjusted and reinstalled multiple times.

Q: How many devices does a 50 pack cover?

A: A standard receptacle or switch uses two mounting screws, so 50 spacers cover about 25 devices.

Q: Does UniShim work for light fixtures?

A: The 6-32 model is for receptacles and switches. For light fixture brackets, use UniShim Model 832.

{n and finish", "text": "Tighten the screw, reinstall the cover plate and restore power." } ] } ] }